| Quantity: | |
|---|---|
RNE-NS-30
SOLARAVEN
841912
The Non-Pressure Solar Water Heater offers a pragmatic, entry-level solution for sustainable hot water generation, particularly suited for regions with limited infrastructure. Operating on passive thermosiphon principles, this system eliminates pumps and electrical components, ensuring silent, energy-independent operation. Its open-loop design features a rooftop-mounted collector connected directly to an insulated storage tank, allowing natural convection to circulate water. Constructed with food-grade 304 stainless steel tanks and ethylene propylene diene monomer (EPDM) seals, it guarantees safe water storage while resisting scale buildup. Ideal for budget-conscious consumers, it achieves a 70% reduction in water heating costs compared to electric geysers, with a carbon payback period under two years.
1. Gravity-Fed Simplicity: Water flows naturally between collector and tank, requiring zero external power.
2. Overheat Protection: Built-in thermal venting valves automatically release excess steam during stagnation.
3. Freeze Resilience: Optional vacuum tube collectors or drain-back systems prevent ice damage in sub-zero climates.
4. Scald Prevention: Mixing valves allow safe temperature adjustment at point-of-use outlets.
5. Portable Design: Compact 100L–200L tank models suit RVs, boats, and off-grid cabins.
· Rural Clinics: Sterilizes medical instruments and provides warm water for patient care in remote areas.
· Small Businesses: Supports hair salons, laundromats, and restaurants with low-volume hot water needs.
· Educational Institutions: Installed in school dormitories to promote hygiene and reduce operational expenses.
· Religious Centers: Supplies ablution water for mosques, temples, and community centers.
1. How is water quality maintained in open-loop systems?
Regular tank descaling (every 6–12 months) and replaceable magnesium anodes prevent corrosion and sediment accumulation.
2. Can the heater be wall-mounted?
Yes, lightweight models (under 150kg when full) support wall installation with reinforced brackets.
3. What is the maximum achievable water temperature?
Under peak sunlight, temperatures reach 65–75°C, suitable for sanitation but requiring mixing for direct use.
4. Are bird-proofing accessories available?
Optional polycarbonate tube shields or wire mesh kits deter nesting while maintaining airflow.
5. How does it handle hard water areas?
Inline water softeners or phosphate dispensers can be added to the inlet pipe to mitigate hardness issues.
Non pressure all stainless steel solar water heater specification:
Model | Solar Vacuum Tube | Capacity | Absorber Area | Suitable for | |
Pcs | Size(mm) | (L) | (㎡) | (Persons) | |
RNE-NS-10 | 10 | 58×1800 | 100 | 1.330 | 2 |
RNE-NS-15 | 15 | 58×1800 | 150 | 1.995 | 3 |
RNE-NS-20 | 20 | 58×1800 | 200 | 2.660 | 4 |
RNE-NS-25 | 25 | 58×1800 | 250 | 3.325 | 5 |
RNE-NS-30 | 30 | 58×1800 | 300 | 3.990 | 6 |
More details of non pressure all stainless steel solar heater technical data :
Non Pressure Solar hot water heater with solar vacuum tubes | |||
Solar hot water tank | 1 | Material of Outer Tank Shell | Galvanized steel with anti corrosive paint |
2 | Material of Inner Tank Chest | stainless steel 304 2B or 316L | |
3 | Water Tank Diameter | 【460/360MM】 | |
4 | Water Tank Insulating Layer | Imported Polyurethane,High Density,【50MM】 | |
5 | Heat Preservation Period | 72～80Hours | |
6 | Welding Method | Argon Arc Welding | |
Solar Vacuum Tube | 7 | Solar vacuum tube structure | All-Glass Double Co-Axial Structure |
8 | Glass Material | High Borosilicate 3.3 Glass | |
9 | Tube Size | 【diameter 58MM* length 1800MM or 1500MM】 | |
10 | Outer Tube Dia.&Glass Thickness | φ58±0.7mm,Glass Thickness 1.6±0.15mm | |
11 | Inner Tube Dia.&Glass Thickness | φ47±0.7mm,Glass Thickness 1.6±0.15mm | |
12 | Coating Material | 【CU/SS-ALN(H)/SS-ALN(L)/ALN】 | |
13 | Sediment Method | Tri-Element Magnetron Sputtering Plating | |
14 | Absorb Ratio | >96%(AM1.5) | |
15 | Thermal Emissivity | ≤6%/(80℃) | |
16 | Hail Resistance | φ25mm | |
Solar water heater Bracket | 17 | Bracket Material | 【stainless steel 304 or 316L】 |
18 | Bracket Angle | 【25°】 | |
19 | Bolts&Muts | Stainless Steel | |
Assistant Tank | 20 | Assistant Tank Material | Stainless steel |
21 | Assistant Tank Capacity | 【5L/8L/20L】 | |
22 | Assistant Tank Model | Vertical/Horizontal,Optional | |
The Non-Pressure Solar Water Heater offers a pragmatic, entry-level solution for sustainable hot water generation, particularly suited for regions with limited infrastructure. Operating on passive thermosiphon principles, this system eliminates pumps and electrical components, ensuring silent, energy-independent operation. Its open-loop design features a rooftop-mounted collector connected directly to an insulated storage tank, allowing natural convection to circulate water. Constructed with food-grade 304 stainless steel tanks and ethylene propylene diene monomer (EPDM) seals, it guarantees safe water storage while resisting scale buildup. Ideal for budget-conscious consumers, it achieves a 70% reduction in water heating costs compared to electric geysers, with a carbon payback period under two years.
1. Gravity-Fed Simplicity: Water flows naturally between collector and tank, requiring zero external power.
2. Overheat Protection: Built-in thermal venting valves automatically release excess steam during stagnation.
3. Freeze Resilience: Optional vacuum tube collectors or drain-back systems prevent ice damage in sub-zero climates.
4. Scald Prevention: Mixing valves allow safe temperature adjustment at point-of-use outlets.
5. Portable Design: Compact 100L–200L tank models suit RVs, boats, and off-grid cabins.
· Rural Clinics: Sterilizes medical instruments and provides warm water for patient care in remote areas.
· Small Businesses: Supports hair salons, laundromats, and restaurants with low-volume hot water needs.
· Educational Institutions: Installed in school dormitories to promote hygiene and reduce operational expenses.
· Religious Centers: Supplies ablution water for mosques, temples, and community centers.
1. How is water quality maintained in open-loop systems?
Regular tank descaling (every 6–12 months) and replaceable magnesium anodes prevent corrosion and sediment accumulation.
2. Can the heater be wall-mounted?
Yes, lightweight models (under 150kg when full) support wall installation with reinforced brackets.
3. What is the maximum achievable water temperature?
Under peak sunlight, temperatures reach 65–75°C, suitable for sanitation but requiring mixing for direct use.
4. Are bird-proofing accessories available?
Optional polycarbonate tube shields or wire mesh kits deter nesting while maintaining airflow.
5. How does it handle hard water areas?
Inline water softeners or phosphate dispensers can be added to the inlet pipe to mitigate hardness issues.
Non pressure all stainless steel solar water heater specification:
Model | Solar Vacuum Tube | Capacity | Absorber Area | Suitable for | |
Pcs | Size(mm) | (L) | (㎡) | (Persons) | |
RNE-NS-10 | 10 | 58×1800 | 100 | 1.330 | 2 |
RNE-NS-15 | 15 | 58×1800 | 150 | 1.995 | 3 |
RNE-NS-20 | 20 | 58×1800 | 200 | 2.660 | 4 |
RNE-NS-25 | 25 | 58×1800 | 250 | 3.325 | 5 |
RNE-NS-30 | 30 | 58×1800 | 300 | 3.990 | 6 |
More details of non pressure all stainless steel solar heater technical data :
Non Pressure Solar hot water heater with solar vacuum tubes | |||
Solar hot water tank | 1 | Material of Outer Tank Shell | Galvanized steel with anti corrosive paint |
2 | Material of Inner Tank Chest | stainless steel 304 2B or 316L | |
3 | Water Tank Diameter | 【460/360MM】 | |
4 | Water Tank Insulating Layer | Imported Polyurethane,High Density,【50MM】 | |
5 | Heat Preservation Period | 72～80Hours | |
6 | Welding Method | Argon Arc Welding | |
Solar Vacuum Tube | 7 | Solar vacuum tube structure | All-Glass Double Co-Axial Structure |
8 | Glass Material | High Borosilicate 3.3 Glass | |
9 | Tube Size | 【diameter 58MM* length 1800MM or 1500MM】 | |
10 | Outer Tube Dia.&Glass Thickness | φ58±0.7mm,Glass Thickness 1.6±0.15mm | |
11 | Inner Tube Dia.&Glass Thickness | φ47±0.7mm,Glass Thickness 1.6±0.15mm | |
12 | Coating Material | 【CU/SS-ALN(H)/SS-ALN(L)/ALN】 | |
13 | Sediment Method | Tri-Element Magnetron Sputtering Plating | |
14 | Absorb Ratio | >96%(AM1.5) | |
15 | Thermal Emissivity | ≤6%/(80℃) | |
16 | Hail Resistance | φ25mm | |
Solar water heater Bracket | 17 | Bracket Material | 【stainless steel 304 or 316L】 |
18 | Bracket Angle | 【25°】 | |
19 | Bolts&Muts | Stainless Steel | |
Assistant Tank | 20 | Assistant Tank Material | Stainless steel |
21 | Assistant Tank Capacity | 【5L/8L/20L】 | |
22 | Assistant Tank Model | Vertical/Horizontal,Optional | |
